thanks to all who replied! It's quite simple in ADS, so I will take this solution. Regards Hermann EKH - EyeKnowHow Hermann Ruckerbauer www.EyeKnowHow.de Hermann.Ruckerbauer@xxxxxxxxxxxxx Veilchenstrasse 1 94554 Moos Tel.: +49 (0)9938 / 902 083 Mobile: +49 (0)176 / 787 787 77 Fax: +49 (0)3212 / 121 9008 schrieb Havermann, Gert: > Hermann, > > I hope you took S2P measurements (round Robin) as the missing IL data between > all ports is not captured in any S1P measurement. > > There is a DesignGuide in ADS that should fit your needs. In a new Schematic > choose DesignGuide Drop down and select "Signal integrity". Open the "Mixed > Mode Simulation using Measured Data" Tree and select Four Port Simulation. > This will open a schematic and dataset where you select the S2P files to the > corresponding ports of the 4-Port device. > It tells you what to measure and how, and the results are very accurate (I > cross checked with our 4-Port VNA). > > Hope this helps > > BR > Gert > > > -------------------------------------------------------------------------- > Absender ist HARTING Electronics GmbH & Co. KG; Sitz der Gesellschaft: > Espelkamp; Registergericht: Bad Oeynhausen; Register-Nr.: HRA 5596; > persönlich haftende Gesellschafterin: HARTING Electronics Management GmbH; > Sitz der Komplementär-GmbH: Espelkamp; Registergericht der Komplementär-GmbH: > Bad Oeynhausen; Register-Nr. der Komplementär-GmbH: HRB 8808; > Geschäftsführer: Torsten Ratzmann > -----Ursprüngliche Nachricht----- > > Von: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] Im > Auftrag von Hermann Ruckerbauer > Gesendet: Donnerstag, 9. September 2010 11:26 > An: si-list@xxxxxxxxxxxxx > Betreff: [SI-LIST] Combine single S-Parameters (S1P) to 4Port model (S4P) > > maybe somebody has already a tool or s script for this ... > > >From a Measurement I got all 16 files for a 4-port Component as seperat > (S1P) files. Now I need to combine this data to a single .s4p file. > Of course i can use my text editor (maybe excel is the better solution) and > do it manualy, but I would hope that somebody has a script or an excel macro > to simplify this process. > > I don't really like to do this, as I'm not sure if the resulting S-Parameter > file will have a physial behavior as I don't know the quality of the > measurement, but I just do not have other data in the moment. > > I have seen something similar as excel Macro from RF-Cafe, but not exactly > what I need. > So any hint where to get a Tool, Script or Macro to do this is very > appreciated! > > I guess I could also do it in ADS ... but I have to admit, that currently I > would have not the right idea how to start. > > > Thanks and regards > > Hermann > > > EKH - EyeKnowHow > Hermann Ruckerbauer > www.EyeKnowHow.de > Hermann.Ruckerbauer@xxxxxxxxxxxxx > Veilchenstrasse 1 > 94554 Moos > Tel.: +49 (0)9938 / 902 083 > Mobile: +49 (0)176 / 787 787 77 > Fax: +49 (0)3212 / 121 9008 > > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List technical documents are available at: > http://www.si-list.net > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu