Hey Folks,
I am designing a board for USB3 SS and with my current stackup, I will have
SS signals changing reference from GND to VBUS for a small portion (near
another connector).
Can I get away with it or should I used decoupling caps near the crossing,
how do I calculated the caps value?
I don't have any space for more than two caps near the connector. Any
suggestions?
--
Thanks
Aakash
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
