Greetings All, In Eric Bogatin's book, Signal Integrity-Simplified, one of his sections is on the Maxwell Capacitance Matrix and 2D Field Solvers (section 10.6). In it, he lists six steps to calculate the capacitance between each conductor. However, an example using the six steps was not given. Can someone in the SI-List point me in the right direction for such an example? I do have Clayton Paul's book, and both of John Howard's high frequency design books, but they don't have what I am looking for. Thanks in-advance. Richard ===== Richard Georgerian Compliance Engineer Carrier Access Corporation 5395 Pearl Parkway Boulder, CO 80301 USA Tele: 303-218-5748 Fax: 303-218-5503 mailto:rgeorgerian@xxxxxxxxxxxxxxxxx ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu