Bob, You can use Synopsys CustomExplorer. Using CustomExplorer, there are 4 commands for eye diagram applications: sx_create_eye : construct an in-memory eye object using parameters such as UI, START_X, STOP_X, Trigger type, etc. ... sx_measure_eye : measure the eye object by providing measurement parameters such as VAC, VDC, VREF, etc .... sx_display_eye : display the eye object in the WaveView interactive graphic windows. sx_query_eye : query eye object measurement results such as WH/WL/ML/MH/OH/OL/FUSS/DVDT/SKEW etc ... batch mode operations (via TCL scripting) are supported for all of these commands except for the "sx_display_eye" command. Hope this helps, let me know if you need more information. Best, Helene -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Fisk Sent: Tuesday, January 24, 2012 11:40 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Batch eye-diagram plotting and measurement? Hi all, I recently ran a lot of DOE type simulations in HSPICE. I am wondering if there is a tool out there that can plot the eye-diagrams and do some basic measurements (eye-width, height, etc.) in a batch format. I can pull in the waveforms one at a time into several programs and plot the eye diagram but is there a tool in which I select a receiver node, specify the UI, Vref, etc. and it plots each eye-diagram independently along with the measurements? I know there are some Matlab scripts available but that requires separate license so it is not a viable solution right now. Any links are appreciated. Thanks Bob ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu