Hi all,
Iâve just released v3.1.2 of PyBERT.
This release fixes several issues that popped up when we ported to Python3, as
well as Issue #59 (GUI exceeding monitor bounds).
If you already have PyBERT installed, the simplest way to upgrade is by
executing the following command, from an Anaconda command prompt with the
appropriate environment (typically, pybert64) activated:
conda upgrade -c dbanas pybert
If youâre installing for the first time, then the best approach is to follow
these quick start instructions:
https://github.com/capn-freako/PyBERT/wiki/instant_gratification ;
<https://github.com/capn-freako/PyBERT/wiki/instant_gratification>
In either case, if you bump into any trouble, let me know, and Iâll try to
help.
Also, Iâve gotten a sudden surge of interest in development help.
So, Iâve put together these preliminary instructions for getting set up in
development mode:
https://github.com/capn-freako/PyBERT/wiki/dev_install ;
<https://github.com/capn-freako/PyBERT/wiki/dev_install>
If you try them, please, let me know how things go.
And THANK YOU! to all, whoâve contacted me recently with interest in helping
with maintenance/development. I really appreciate the community support. :)
-db
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
