[SI-LIST] Re: AC series capacitor position in high speed differential signals
- From: Istvan Novak <istvan.novak@xxxxxxx>
- To: Lee Ritchey <leeritchey@xxxxxxxxxxxxx>
- Date: Wed, 12 May 2010 23:55:19 -0400
Lee,
As it was pointed out in earlier threads, location does make a
difference unless reflections are
negligibly small. Assuming linearity, when we move components around,
reciprocity prevails,
but voltage transfer function from source to load will change, which in
turn impacts eye
parameters.
Regards,
Istvan Novak
Oracle-America
Lee Ritchey wrote:
> This has been answered before on this forum. Since the circuits are
> linear, it does not matter from a signal integrity point of view.
>
> Lee
>
>
>
>> [Original Message]
>> From: fei xue <harrison_cls@xxxxxxxxxxxx>
>> To: <si-list@xxxxxxxxxxxxx>
>> Date: 5/12/2010 11:35:49 AM
>> Subject: [SI-LIST] AC series capacitor position in high speed
>>
> differential signals
>
>> Hello all,
>> We often can get different guideline of placing capacitor position when
>>
> placing AC series capacitor on high speed differential signals, like PCIe,
> SAS or LVDS signals. sometimes we followed the guideline to put capacitors
> near driver, sometimes near multi-connection connectors or sometimes put it
> near receivers.
>
>> Could anybody tell me what is the consideration of capacitor placing
>>
> position? Thanks!
>
>> Harrison
>>
>>
>>
>>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
