Howard,
Have you completed the task of replacing your throttle controls and the cables?
I should be replacing mine in the next month.
Please enlighten me as to what to expect.
Ted
--- On Tue, 8/18/09, Howard Lieberman <ltkhbl@xxxxxxx> wrote:
From: Howard Lieberman <ltkhbl@xxxxxxx>
Subject: Re: [Scoaa-members] controller cables
To: scoaa-members@xxxxxxxxx
Date: Tuesday, August 18, 2009, 6:36 PM
Ted,
Thank you. That does help. Getting the SL3 model Teleflex was
a bit of a struggle, but it is on its way to my service shop. I’ll let you
know how the change over goes in about two weeks. I’ll be away for that time
and the further away I am from the boat and the mechanics the better for both
of us!
Howard
From:
scoaa-members-bounces@xxxxxxxxx [mailto:scoaa-members-bounces@xxxxxxxxx] On
Behalf Of Ted Cook
Sent: Tuesday, August 18, 2009 3:46 PM
To: scoaa-members@xxxxxxxxx
Subject: Re: [Scoaa-members] controller cables
Howard,
I will be replacing our throttle controls this Fall. I had asked
Graeme Nolan, at Seawind, what controls they were now installing on new boats
since the old Teleflex 700TD is no longer available. Here is his
response.
"The
top mount Teleflex control we now use is model MT-3 available from Bob Litter
Agencies (9648 6606). It uses the same control cables but mounting cut-out is
different to the 700TD. You will need to have an adapter cut-out made up of
wood (Teak from Caporns, Brookvale) or some other material. Kind Regards,
Graeme"
I am
hoping that my cables are in good shape. But being 9 years old....So, I
am not able to help you with your question about cable length, but
fortunately we have two sets. You can pull one and have it in hand to
find the proper replacement. I was told by Teleflex that both the 700TD
and the newer MT-3 accept the same cable end. I may be writing you in a
few months to ask how this project came out if my cables do indeed need
replacing.
I have had
my control box opened up, but not taken off. It appears pretty straight
forward. I don't know what the mechanic means by glue.
Hope this
has helped some.
Ted Cook
Morning
Glory
--- On Tue, 8/18/09, Howard Lieberman <ltkhbl@xxxxxxx>
wrote:
From: Howard Lieberman <ltkhbl@xxxxxxx>
Subject: [Scoaa-members] controller cables
To: scoaa-members@xxxxxxxxx
Date: Tuesday, August 18, 2009, 10:30 AM
Hello
all,
I
have a 1000 (#90) and must replace the controller and cables. The
controller is easy, but without pulling out all of the cables the shop cannot
determine which cables are used and at what lengths. I’d rather have the
cables in hand before they begin work. Can any tell me what length and
which model cables are used. The controller is a Teleflex sl3 top
mounted dual regular box. Has anyone had the box and/or cable replaced?
Was it a difficult job? The mechanic is telling me that the box is
glued in place and will be completely lost in removal.
Thanks
for the help.
Regards,
Howard
Lieberman
SW-1090xl
captainhoward@xxxxxxxxxxx
-----Inline Attachment Follows-----
_______________________________________________
Scoaa-members mailing list
Scoaa-members@xxxxxxxxx
http://smtp.scoaa.net/mailman/listinfo/scoaa-members ;
-----Inline Attachment Follows-----
_______________________________________________
Scoaa-members mailing list
Scoaa-members@xxxxxxxxx
http://smtp.scoaa.net/mailman/listinfo/scoaa-members
