Re: [Scoaa-members] Pulling new antenna wires in mast

  • From: "JOE WEATHERS" <JWEATHERS@xxxxxxxxxxxx>
  • To: <scoaa-members@xxxxxxxxx>
  • Date: Thu, 13 May 2010 15:22:16 -0700

Hi Ted,
Glad you completed the TV cable installation. Would you tell me where you 
purchased the Glomex 10" antenna. I can only fine a 14" model.
Sea ya
Joe Weathers   jweathers@xxxxxxxxxxxx
  ----- Original Message ----- 
  From: Ted Cook 
  To: scoaa-members@xxxxxxxxx 
  Sent: Wednesday, May 05, 2010 2:32 PM
  Subject: Re: [Scoaa-members] Pulling new antenna wires in mast


        I have successfully completed this project.  Thanks to all for your 
ideas.  
        I took apart the mast light and attached 5 strands of 80 lb. test 
monofilament.  My wife pulled the mast light wires down to the base of the mast 
where we had freed the black hose exposing the wires.  I then pulled the mast 
wire to the top and re-wired the light, as this was the immediate priority.  

        One at a time, we used one strand of mono to pull the VHF antenna wire 
through.  It was snug at the bottom as the wire was pulled through the exit 
nipple.  We then pulled the TV antenna wire through after smearing the end with 
silicone lubricant.  This made the second antenna wire pull through much 
easier.  The exit nipple is full now.

        I mounted a Glomex 10" TV antenna at the top of the mast and the 
reception is great.   We are able to pick up TV stations from West Palm Beach 
that my house antenna, located 25 miles closer, does not pick up.  The sailboat 
is on a mooring in Key Biscayne.


        --- On Sun, 4/18/10, Cameron Simmons <doublewidecat@xxxxxxxxx> wrote:


          From: Cameron Simmons <doublewidecat@xxxxxxxxx>
          Subject: Re: [Scoaa-members] Pulling new antenna wires in mast
          To: scoaa-members@xxxxxxxxx
          Date: Sunday, April 18, 2010, 4:25 PM


          Try using a short length of bicycle chain attached to a some strong
          thin line.  The chain will help pull it down and makes fishhing it out
          the bottom easier.

          Cam Simmons
          "Double-Wide"

          On 4/16/10, Ted Cook <tedcookjr@xxxxxxxxx> wrote:
          > Our boat will be hauled out next week for a bottom job.  I need to 
install a
          > new VHF antenna wire and TV antenna wire in the mast conduit.  I 
have found
          > that the conduit is offset from the mast openings at the top and 
bottom.
          > Has anyone had success pulling new wires through?  Share your 
lessons,
          > please.
          >
          > Ted
          >
          >
          >
          >
          _______________________________________________
          Scoaa-members mailing list
          Scoaa-members@xxxxxxxxx
          http://smtp.scoaa.net/mailman/listinfo/scoaa-members
       




------------------------------------------------------------------------------


  _______________________________________________
  Scoaa-members mailing list
  Scoaa-members@xxxxxxxxx
  http://smtp.scoaa.net/mailman/listinfo/scoaa-members



------------------------------------------------------------------------------



  Internal Virus Database is out of date.
  Checked by AVG - www.avg.com 
  Version: 8.5.437 / Virus Database: 271.1.1/2773 - Release Date: 03/27/10 
07:32:00

Other related posts: