Re: [MirageOS-devel] MirageOS on rumprun now with networking and HTTP
- From: Thomas Leonard <talex5@xxxxxxxxx>
- To: "mirageos-devel@xxxxxxxxxxxxxxxxxxxx" <mirageos-devel@xxxxxxxxxxxxxxxxxxxx>, rumpkernel-users@xxxxxxxxxxxxx, Richard Mortier <mort@xxxxxxxxxx>, Anil Madhavapeddy <avsm@xxxxxxxxxx>
- Date: Fri, 12 Jun 2015 16:40:53 +0100
On 12 June 2015 at 12:49, Martin Lucina <martin@xxxxxxxxxx> wrote:
Hi all,
I'm happy to announce that the MirageOS cross-port to rumprun has
progressed to the point where it can now serve HTTP.
Detailed instructions for building "MiRump" unikernels can be found in the
README in my opam-rumprun repository:
https://github.com/mato/opam-rumprun
Obligatory screenshot from running on KVM:
http://ibin.co/24yZp6GhHCFU
I've also added support to the mirage-seal tool for the rumprun target:
https://github.com/mato/opam-rumprun#example-mirage-seal
Next steps are getting the Ocaml-TLS stack working (builds, but not
functional yet) and adding support for the OCaml TCP stack (requires
integration with rumprun).
Please try it out and let me know how you get on.
Very cool! I got the OCaml hello world example working, building in an
Ubuntu 15.04 docker container and running on the host under kvm.
Note: I had to "apt-get install gcc-4.8-multilib", otherwise the
initial "opam sw" failed.
I was able to run it with:
$ qemu-system-i386 -kernel ./hello.bin -append '{"cmdline": "../../hello.bin"}'
(the "rumprun" script worked too, but running it this way made things
clearer to me)
I also tested mirage-skeleton/console, which worked but ran rather
fast (it's supposed to wait 1s between each print). Calling
gettimeofday showed the clock running fast for some reason.
--
Dr Thomas Leonard
http://roscidus.com/blog/
GPG: DA98 25AE CAD0 8975 7CDA BD8E 0713 3F96 CA74 D8BA
Other related posts:
