Thank you, Marc! I will buy it now for my 2.8E. I just worried abount bay 3 inner diameter measure. Thank again! Xuan Truong -----Original Message----- From: rollei_list-bounce@xxxxxxxxxxxxx [mailto:rollei_list-bounce@xxxxxxxxxxxxx] On Behalf Of Marc James Small Sent: Monday, January 14, 2008 11:04 AM To: rollei_list@xxxxxxxxxxxxx Subject: [rollei_list] Re: rollei hood bay 3 At 10:03 PM 1/13/2008, XUAN TRUONG wrote: >I measured the inner diameter of bay 2 hood, it is about 42mm. I think the >bay 3 is bigger, so, the first bay 3 can mount to my 2.8E? Sorry, I don't >have bay 3 hood, I'm finding one, and I saw some type of bay 3 hood. > I am honestly confused about your queries. If you need a Bayo 3 hood, you have two choices. You buy a Bayo 3 hood or you buy a Bayo 3 Series VI adapter and a Series VI hood. There really is not a third choice. The current Franke & Heidecke concern sell Bayo III accessories to my relatively certain belief. I use an older F&H metal Bayo 3 hood on my 2.8GX and a Harrison & Harrison Bayo 3 Series VI adapter and hood on my 2.8F. So, just what is the issue? How can we help? Marc msmall@xxxxxxxxxxxx Cha robh bàs fir gun ghràs fir! --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list