I measured the inner diameter of bay 2 hood, it is about 42mm. I think the bay 3 is bigger, so, the first bay 3 can mount to my 2.8E? Sorry, I don't have bay 3 hood, I'm finding one, and I saw some type of bay 3 hood. Thanks, Xuan Truong -----Original Message----- From: rollei_list-bounce@xxxxxxxxxxxxx [mailto:rollei_list-bounce@xxxxxxxxxxxxx] On Behalf Of Carlos Manuel Freaza Sent: Monday, January 14, 2008 1:03 AM To: rollei_list@xxxxxxxxxxxxx Subject: [rollei_list] Re: rollei hood bay 3 --- XUAN TRUONG <truongthx@xxxxxxx> escribió: > I find a hood of rollei but don't know it is bay 3 > or rollei baby's mount? I > see the "Rollei F&H" logo on a side and "o38" on > another side... It is B III, the firsts BIII lens hoods (made for the 2.8B Biometar) have engraved the diameter symbol and "38", the B III has 38mm of diameter.- Carlos Tarjeta de crédito Yahoo! de Banco Supervielle. Solicitá tu nueva Tarjeta de crédito. De tu PC directo a tu casa. www.tuprimeratarjeta.com.ar --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list