I had to do the same. The hole in the other camera cam plate is now a slot. Not perfect, but works o.k. Regards, Sven ----------------------------------------------------------------- Interesting Project. Incidentally, I have had to couple two shafts together in a model boat and the solution was to make the place the driving pin goes into, into a slot instead of a hole. (or the other way around). DAW _____ Von: rollei_list-bounce@xxxxxxxxxxxxx [mailto:rollei_list-bounce@xxxxxxxxxxxxx] Im Auftrag von Don Williams Gesendet: Samstag, 19. Januar 2013 23:02 An: rollei_list@xxxxxxxxxxxxx Betreff: [rollei_list] Re: Stereo Rollei "TriLR" from two Rolleicords At 12:14 PM 1/19/2013, you wrote: Hello Rollei Folks, I have completed my latest camera DIY project, a stereo Rollei "TriLR" from two Rolleicords. Have a look, if you like: http://www.meinezersaegtenkameras.de/ETriLR.html Regards, Sven