Hello Richard;
According to the Rollei Report V, the 6000 system,
SL66 system and 2,8GX/FX TLR cameras have interchangeable focusing screens,
they can use the same focusing screens. This book describes as "Universal
Focusing screen" for these cameras this one (Prchnow Register PR
1014/2) " Universal
focusing screen, measuring wedge for maximum setting accuracy for vertical
lines, micro-grid with setting criterion, flicker-free image,, focusing
screen with microstructure for assessing sharpness over the entire image
field" , it was manufactured from 1976.
The camera description for the 6003 SRC 1000 says: "Interchangeable bright
focusing screen" and the large focusing screen models list for the 6000
system and cameras mentioned previously shows a focusing screen called "
Bright focusing screen (Hell Einstellscheibe)", the description says.
",Focusing screen with microstructure, sharpness graduation of the entire
image field, undisturbed motif design, also for lenses with a very low
effective aperture. Orientation aids for 4.5x6 vertical and horizontal
shots" This focusing screen does not have a microprism collar and _it does
not have a split image in the central circle_. However in the Rollei
focusing screens list there is a similar focusing screen with a _horizontal
split image in a smaller circle within the central circle_ as you describe
for your camera focusing screen. Your focusing screen is included in the
Rollei focusing screen list, however it does not mean it is an original
Rollei focusing screen because some Chinese copies look similar, but it
could be an original Rollei focusing screen too.
Carlos
,
El mar., 10 nov. 2020 a las 0:52, Richard Urmonas (<richard@xxxxxxxxxxx>)
escribió:
Perhaps someone can tell me what is the standard screen on the 6003 SRC
1000. I was looking at the instructions for the 6003 Pro and noticed that
it shows a horizontal split image with a micro prism collar, while my
camera has a small horizontal split image (no micro prism collar). This is
not even listed as an alternative screen in the instructions. Is this the
normal screen (the instructions are for the pro while I have a SRC1000) or
has someone fitted some sort of after market screen?
Thank you,
Richard Urmonas
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
