Hello Richard,
The standard screen of the 6003 SRC 1000 is described as “Hell-Einstellscheibe”
or Bright Screen. Nine slightly different Bright Screen were offered. The ones
with horizontal split images always had micro prism collars. The Super Bright
Screen has the same specs. The later high definition or High-D-Screen has the
split image without the micro prism collar.
Bright Screens have full frame lines for 4.5x6 cm, grids or no frame lines at
all.
The High-D-Screen shows very thin, interrupted frame lines for 4.5x6 cm images.
Basically crosses at the four corners with just short piece of frame line in
between.
Your 6003 may have the desirable High-D-Screen of later 6000 series cameras.
Best regards,
Ferdi.
----
Ferdi Stutterheim,
Drachten, Netherlands.
Op 10 nov. 2020, om 04:51 heeft Richard Urmonas <richard@xxxxxxxxxxx> het
volgende geschreven:
Perhaps someone can tell me what is the standard screen on the 6003 SRC 1000.
I was looking at the instructions for the 6003 Pro and noticed that it shows
a horizontal split image with a micro prism collar, while my camera has a
small horizontal split image (no micro prism collar). This is not even
listed as an alternative screen in the instructions. Is this the normal
screen (the instructions are for the pro while I have a SRC1000) or has
someone fitted some sort of after market screen?
Thank you,
Richard Urmonas