If you made the camera wider, you would still need to contend with the
width of the film itself. And if you make the camera taller, it's really
only useful for taking 6x7 cm in a vertical format.
On Fri, Apr 14, 2017 at 2:28 AM, Ferdi Stutterheim <ferdi@xxxxxxxxxxxxxxxx>
wrote:
That is what I thought. For 6 x 7 cm the body should be either wider or
taller. I think there is no way one can find another cm within the existing
body. Old Mr. Heidecke used all existing room.
Ferdi.
Op 14 apr. 2017, om 01:29 heeft Richard Knoppow <dickburk@xxxxxxxxxxxxx>het volgende geschreven:
impossible. I think it would take more than just a slightly modification of
I rather wonder. The main frame casting would, I think, make this
the standard body. The plate adapter takes plates or films larger than
6x6Cm but the top and bottom of the frame are masked off by the film gate.
--
Richard Knoppow
dickburk@xxxxxxxxxxxxx
Los Angeles, CA, USA
-----Original Message-----
From: Ferdi Stutterheim <ferdi@xxxxxxxxxxxxxxxx>---
Sent: Apr 13, 2017 12:48 PM
To: Rollei List <rollei_list@xxxxxxxxxxxxx>
Subject: [rollei_list] Rolleicord Vb 6 x7 cm?
Hello All,
Has there been a special Rolleicord Vb for an image size of 6 x 7 cm?
Best regards,
Ferdi Stutterheim.
---
Rollei List
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
