The Rollei service uses Pattex classic.
http://www.pattex.de/pattex/produkte/kraftkleber/hochwaermend.htm
No Problems with the screws as Pattex remains elastic.
Greetings
Dirk
I have a rather nice Rollei 3.5F and I had it serviced by Ivor Matanle's mate, Ed Trzoska. He did a fine job. However, the leather on the front panel now curls up at the corners slightly - it is 'sticky' and adheres when I press it down, but comes up again in about a day. I asked Ed about this and he suggested using evo-stick. Whilst I have every respect for Ed, I must admit this sounded a bit severe, esp because of the screws underneath!
What do you guys use? Any helpful info gratefully recvd!
Thanks,
Bob McClelland Cornwall (U.K.)
--- Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at //www.freelists.org/archives/rollei_list--- Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at //www.freelists.org/archives/rollei_list
--- Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Online, searchable archives are available at //www.freelists.org/archives/rollei_list