Hello Thor,
there are adapter for 67mm and 72mm thread filter to Bay VI on the market. I
have opted for the 67mm size because it allows the regular Bay VI lens shades
to fit, too. Vignetting is no issue.
Anyway I use the Formatt 100mm filter set system to use filters on my cameras
ranging from 5x4 to 35mm. The link:
https://www.formatt-hitech.com/hardware/?category=100mm+System It is similar to ;
the Lee system but costs less.
Best regards,
Volker
Am 08.12.2018 um 02:59 schrieb Thor Legvold (Redacted sender "tlegvold" for
DMARC):
I’m trying to rationalize my filter collection across systems. For the TLR I
have a pretty complete set in Bay III, too small to be of use for any other
camera, and due to the TLR design I can’t really use other size filters with
that camera.
However for the 6008 I have a bunch of Bay VI filters, as well as a smaller
collection in 95mm to fit the 90mm APO Symmar Macro.
I recently bought a 4x5 setup, with a Rodenstock APO-Sironar-S 210mm. The
filter thread size is 72mm. Later I may pick up something wider, but for now
I’m wondering if there is a 72mm -> Bay VI adapter, and if it will cause
vignetting or not. If so, I guess I’ll go with 72mm -> 95mm.
The filters in question are largely for B&W, i.e. yellow, green, orange, red,
as well as a polarizer. I recently picked up a set of Lee grad filters and
holder with adapters that will fit all the lenses I have, and can be mounted
outside of any B&W filters.
Thanks for any suggestions.
Thor
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list