Hi list, Is the 790C in question installed in an LDS church? If so, please leave M1 settings as is. This is requested by the LDS headquarters. The 790C's factory piston settings on M1 were specifically designated for the 790C by the Tabernacle organists (Richard Elliott, John Longhurst and Clay Christiansen) for use in the LDS churches. Of course, M2, M3 and M4 are available for your personal favorite combination settings. Best regards, Dan > A recently installed Rodgers 790C has combination action > settings on M1 which are mostly unuseable in the setting in > which the organ is installed but the manual indicates they > are "set at the factory". Can anyone tell me if these factory > settings can be reset and, if so, how? The two other Rodgers > organs which I play have a way to lock/unlock the combination > action memory but if that is possible on the 790C it is not > obvious. Dan Miller Product Manager and Product Design Manager for Four Manual Custom Organs Rodgers Instruments LLC dmiller@xxxxxxxxxxxxxxxx (503) 681-6544 fax: (503) 681-0444 ! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Find new MIDI music and Guides to Rodgers Organs at www.frogmusic.com To post send messages to: rodgersorgan@xxxxxxxxxxxxx To unsubscribe or change mail delivery (digest, vacation) go to www.frogmusic.com/rodgersmem.html