[roc-chat] Re: using motor ejection charge as backup?

  • From: Terry McKiernan <terry@xxxxxxxxxxxxx>
  • To: roc-chat@xxxxxxxxxxxxx
  • Date: Tue, 16 Jul 2019 16:13:19 -0700

Thanks Cris. Is there any way to lengthen the delay?  The J360 comes with a 15 
second delay grain and it sounds like I would want 17 seconds. 
    
Terry

-------- Original message --------
From: Cris Erving <cris.erving@xxxxxxxxxxx> 
Date: 7/16/19  8:37 AM  (GMT-08:00) 
To: roc-chat@xxxxxxxxxxxxx 
Subject: [roc-chat] Re: using motor ejection charge as backup? 



For motor eject as a backup, you want the adjusted delay to be about two 
seconds past what you expect your apogee to be, so if it's a bit short it 
shouldn't be a problem.   Motor delays almost never run long.   If your 
projected time to apogee is 14 seconds
 and your maximum delay is 15 seconds, that's a bit close... don't be surprised 
if the motor eject happens before the altimeter fires.




Eggtimer Cris






From: roc-chat-bounce@xxxxxxxxxxxxx <roc-chat-bounce@xxxxxxxxxxxxx> on behalf 
of Terry McKiernan <terry@xxxxxxxxxxxxx>
Sent: Tuesday, July 16, 2019 7:57 AM
To: roc-chat@xxxxxxxxxxxxx <roc-chat@xxxxxxxxxxxxx>
Subject: [roc-chat] using motor ejection charge as backup?
 


Polling the ROC crowd for opinions here ... I'm wondering if it's

recommended to use a motor ejection charge as a backup to the altimeter 
on high-power flights.

Specifically this Saturday I'll be flying my Firestorm 54 "stretch" on a 
CIT J360 Skidmark.  It has a Raven3 altimeter to fire the drogue and 
main ejection charges.  I'm wondering if I should leave the J360's 
charge in place as a backup to fire the drogue just in case.

The OpenRocket sim says time to apogee after motor burnout is 14.8.  The 
J360 conveniently comes with a 15-second delay grain. So that seems 
about perfect as a backup.

My concern is that OpenRocket sims are just sims after all, and may not 
be very accurate.  Plus delay grains are not very high-precision 
either.  I'm mostly worried about the flight being longer to apogee than 
the sims says, and the delay grain burning through faster than expected, 
and thus releasing the drogue a few seconds before apogee while the 
rocket is still moving pretty fast.

What do you think?  Leave the motor charge in as a backup, or avoid it 
due to the possibility of early ejection, and just count on the Raven to 
do its thing?

Thanks!

Terry


-- 
ROC-Chat mailing list
roc-chat@xxxxxxxxxxxxx
//www.freelists.org/list/roc-chat




Other related posts: