[roc-chat] Re: [roc-chat] Re: [roc-chat] Re: [roc-chat] 3” tubes

  • From: "mnkramer.net" <kramer@xxxxxxxxxxxx>
  • To: roc-chat@xxxxxxxxxxxxx, "Lee Scott (Redacted sender leescott91006 for DMARC)" <dmarc-noreply@xxxxxxxxxxxxx>
  • Date: Sat, 26 May 2018 11:23:20 -0700

Madcow has it https://www.madcowrocketry.com/cardboard-tubes/

Mike Kramer


On 5/26/2018 7:16 AM, Lee Scott (Redacted sender leescott91006 for DMARC) wrote:

Terry

Thanks for the suggestion!

Lee

Sent from my iPhone

On May 23, 2018, at 9:43 PM, Terry McKiernan <terry@xxxxxxxxxxxxx> wrote:

Lee,

I bought some 3" I.D. blue tube direct from Always Ready Rocketry:

https://www.alwaysreadyrocketry.com/

Better than cardboard IMHO.  I used to to make a payload bay & coupler for my dual-stage 
rocket project, joining two 3" cardboard models from LOC Precision.  The blue tube 
diameter is almost exactly the same as the LOC 3" cardboard and is much stronger.  I 
definitely recommend it over cardboard; it's easy to work with an only a little more 
expensive.

Also available from Apogee:

https://www.apogeerockets.com/Building_Supplies/Body_Tubes/Blue_Tubes/75mm_Blue_Tube?cPath=42_43_56&;

Hope this helps

Terry

On 5/23/2018 5:59 PM, Lee Scott (Redacted sender leescott91006 for DMARC) wrote:
Does anyone know anyone out there that sells 3”ID - 48” long cardboard or 
phenolic tubes? Prefer cardboard.

Thanks

Lee

Sent from my iPhone


--
ROC-Chat mailing list
roc-chat@xxxxxxxxxxxxx
//www.freelists.org/list/roc-chat



Other related posts:

  • » [roc-chat] Re: [roc-chat] Re: [roc-chat] Re: [roc-chat] 3” tubes - mnkramer.net