[roc-chat] Re: [roc-chat] Re: [roc-chat] 3” tubes

  • From: "Lee Scott" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "leescott91006" for DMARC)
  • To: roc-chat@xxxxxxxxxxxxx
  • Date: Sat, 26 May 2018 07:16:47 -0700

Terry

Thanks for the suggestion!

Lee

Sent from my iPhone

On May 23, 2018, at 9:43 PM, Terry McKiernan <terry@xxxxxxxxxxxxx> wrote:

Lee,

I bought some 3" I.D. blue tube direct from Always Ready Rocketry:

https://www.alwaysreadyrocketry.com/

Better than cardboard IMHO.  I used to to make a payload bay & coupler for my 
dual-stage rocket project, joining two 3" cardboard models from LOC 
Precision.  The blue tube diameter is almost exactly the same as the LOC 3" 
cardboard and is much stronger.  I definitely recommend it over cardboard; 
it's easy to work with an only a little more expensive.

Also available from Apogee:

https://www.apogeerockets.com/Building_Supplies/Body_Tubes/Blue_Tubes/75mm_Blue_Tube?cPath=42_43_56&;

Hope this helps

Terry

On 5/23/2018 5:59 PM, Lee Scott (Redacted sender leescott91006 for DMARC) 
wrote:
Does anyone know anyone out there that sells 3”ID - 48” long cardboard or 
phenolic tubes? Prefer cardboard.

Thanks

Lee

Sent from my iPhone



-- 
ROC-Chat mailing list
roc-chat@xxxxxxxxxxxxx
//www.freelists.org/list/roc-chat



--
ROC-Chat mailing list
roc-chat@xxxxxxxxxxxxx
//www.freelists.org/list/roc-chat

Other related posts:

  • » [roc-chat] Re: [roc-chat] Re: [roc-chat] 3” tubes - Lee Scott