[roc-chat] Re: Vacuum Pump

  • From: "" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "hyflynboy" for DMARC)
  • To: roc-chat@xxxxxxxxxxxxx
  • Date: Fri, 24 Apr 2020 12:28:22 -0700

I found a cheap pump at Harbor Freight. They have two grades, the cheap one was 
about $100 when I bought it about 4 years ago. Used it for checking altimeter 
along with a bell jar I got from Amazon. 

Sent from my iPhone

On Apr 23, 2020, at 9:51 AM, John Coker <john@xxxxxxxx> wrote:


I have used a venturi as well for vacuum bagging. (I use a system meant for 
laminating: https://www.qualityvak.com/air.html.)
I'm sure a true vacuum pump would get a harder vacuum, but for most purposes 
a venturi works well enough.

Now, if you don't have a good air compressor, then a venturi is less 
appealing.

John

On Thu, Apr 23, 2020 at 9:14 AM James Dougherty <jafrado@xxxxxxxxx> wrote:
Lee

https://youtu.be/cDIooANLU3Q

that Nike Nike I flew off your tower had the sustainer bagged with this pump:

https://www.fibreglast.com/product/1148_Vacuum_Generator/Vacuum_Bagging_Pumps

fins bagged with food-saver


https://www.amazon.com/dp/B07VPRW77Z/ref=cm_sw_r_cp_api_i_C6BOEb8Q8FW1V

best bang for the buck...

thanks Dierking for your remora cam 


On Apr 23, 2020, at 8:27 AM, Lee Scott (Redacted sender "leescott91006" for 
DMARC) <dmarc-noreply@xxxxxxxxxxxxx> wrote:

Guys in the know

I am going to be purchasing a vacuum pump in the near future and there 
seems to be quite a few options.

I plan to use it for the following:

- degassing propellant for research motors
- vacuum bagging of composite laminates for fins and tubes
- testing of electronics in a chamber.

I am not necessarily looking for the best price. I am looking for a pump 
that will meet my needs and not be something I need to worry about not 
performing as expected.

Does anyone have any recommendations?

Thanks

Lee




-- 
ROC-Chat mailing list
roc-chat@xxxxxxxxxxxxx
//www.freelists.org/list/roc-chat

Other related posts: