Being able to bend is over-rated. That's what you hire the kids for. Glad
you're doing well.
Chris
From: Phil Laisure <pal129@xxxxxxx>
To: "roc-chat@xxxxxxxxxxxxx" <roc-chat@xxxxxxxxxxxxx>,
Date: 06/19/2015 06:56 PM
Subject: [roc-chat] Re: ROCsim
Sent by: roc-chat-bounce@xxxxxxxxxxxxx
Hi Chris!
Thanks for asking. Yes, I'm on the mend, looking forward to making
it to the November ROCstock, but I'm hoping I'll be able to make a launch
sooner.
So, after this 4th surgery, my back is fused from the base of the
spine (S-1) up to T-12. I don't bend so good anymore.
Phil Laisure
On Friday, June 19, 2015 1:41 PM, Chris J Kobel <Chris.J.Kobel@xxxxxxxx>
wrote:
Phil,
Missed you at RocStock. How did the back surgery go? I hope it went well
and that you are on the mend.
Chris
From: Phil Laisure <pal129@xxxxxxx>
To: "roc-chat@xxxxxxxxxxxxx" <roc-chat@xxxxxxxxxxxxx>,
Date: 06/19/2015 12:09 PM
Subject: [roc-chat] Re: ROCsim
Sent by: roc-chat-bounce@xxxxxxxxxxxxx
Hi! Open Rocket is great. It will open a ROCsim file, but you may not be
able to save the results. At leas, I haven't figured out how to do that.
The latest version will also allow tube fins, pretty cool.
Phil Laisure
On Friday, June 19, 2015 10:26 AM, Chris Attebery
<chrisattebery1971@xxxxxxxxx> wrote:
OpenRocket will open RockSim files usually without any issues.
On Fri, Jun 19, 2015 at 10:15 AM, Adrian P. Bailey <adrian@xxxxxxxxxxxxxxx
wrote:Thank you!
wrote:I have a project in mind for the November launch and would like to use
