Jamie got me into the Ender 3 Pro model and using Fusion 360 as a design
program. I'm very happy with both. I'm not sure you can beat the price.
https://www.creality3d.shop/products/creality3d-ender-3-pro-high-precision-3d-printer?gclid=CjwKCAjwssD0BRBIEiwA-JP5rP-b-xqfOvrwcONtKi4tCSfJ5mXIdoCJQLx0DYATFgpa_JwH9fx5URoCFsYQAvD_BwE
Kurt
On Fri, Apr 10, 2020 at 8:45 AM Jamie Clay <jamie@xxxxxxx> wrote:
From my experience the Ender 3 from Creality is an amazing deal - I
'discovered' it after building my Prusa (which was a great experience) - I
have both now and switch between them as needed.
You CAN adapt the Ender 3 to use multiple materials (I've not done it yet)
so you can use soluble filament for supports but I would get started doing
design and printing first before getting involved with PVA filaments.
If you don't already have 3D modeling chops - start with Autodesk's Fusion
360 - it's 'free' and VERY robust for most design purposed that rocketry
requires.
There are a few of us here now that are 'infected' with the 3D-PRINT virus
- so I think you'll find a huge community of support as you get started.
I've also found the communities on Facebook very helpful as well.
On April 10, 2020 at 8:29 AM John Coker <john@xxxxxxxx> wrote:
My first machine was a Prusa MK3, which was a good choice I think. The
major thing it is missing is dual-extrusion (to be able to print soluble
supports). This is a great machine with a large community and active
company behind it. If you're sure you won't need the build volume, they
have a newer Mini model which is cheaper.
John
On Fri, Apr 10, 2020 at 2:54 AM Rick D. < rocketrick@xxxxxxxxx> wrote:
I know that quite a few ROC members have 3D printers, and that there are a
ton of options out there. I'm thinking of buying and/or building one for
myself, and am looking for advice.
What models currently give the best bang for the buck? I'm thinking of
using one to make small project enclosures for my own electronic projects,
as well as altimeter sleds for rocketry use, similar to the ones Mike
Kramer designed (and I'm sure lots of other cool uses will present
themselves as soon as I have one).
I'm looking to spend as little as possible for a useful machine I won't
immediately regret buying. If there are "must have" features, or common
problems that are solved by slightly more expensive models, I'd like to
know that....
Basically, with all the collected experience of ROC members doing 3D
printing, I'd like to know what machines you wished you had bought when you
were starting out, instead of what you did buy. Help me learn from your
initial mistakes....
Thanks in advance,
Rick Dickinson
-- ROC-Chat mailing list roc-chat@xxxxxxxxxxxxx
//www.freelists.org/list/roc-chat
