[riscos-printing] Re: Printing a PDF file
- From: Martin Wuerthner <lists@xxxxxxxxxxxxxxx>
- To: riscos-printing@xxxxxxxxxxxxx
- Date: Fri, 09 Mar 2007 13:40:34 +0100
In message <4ec0445239p_dowson@xxxxxxxxxxxxxxxx>
Peter Dowson <p_dowson@xxxxxxxxxxxxxxxx> wrote:
> In article <3e0847c04e.martin@xxxxxxxxxxxxxxxxxxx>,
> Martin Wuerthner <lists@xxxxxxxxxxxxxxx> wrote:
>
>> I think there were some vertical positioning problems with Epsons at
>> very low draft resolutions, so have you tried with at least 720dpi,
>> preferably using a square resolution (i.e., x resolution equals y
>> resolution)? With the Epson the print should really start at the very
>> top (obviously, the document you print may or may not have any
>> graphical elements at the very top).
>
> You are right 720 * 720 prints the whole page with the RX630 Boarderless
> turned off.
Good. I can confirm that the vertical positioning problem with certain
resolutions (e.g., 360 x 240 DPI DRAFT) have been fixed in the latest
Gutenprint release 5.0.1-rc1, so it will work correctly with the
forthcoming GPDriver 2.07.
Martin
--
---------------------------------------------------------------------
Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx
---------------------------------------------------------------------
Other related posts:
