In message <527e1fc54e.wlm@xxxxxxxxx> Willem Arends <wlm4p@xxxxxxxxx> wrote: > In message <927d0ec54e.Derek@xxxxxxxxxxxxxxxxx> > Derek Barnett <derek@xxxxxxxxxxxxxxxxx> wrote: > >> Hi all again, >> Have been experimenting yet again with the above setup. Printing the >> 4cm filled circles in Draw, colour setting as follows: >> Black = 0% Red 0% Green 0% Blue >> Yellow = 100% Red 100% Green 0% Blue >> Magenta = 100% Red 0% Green 100% Blue >> Cyan = 0% Red 100% Green 100% Blue >> Only the Black and Yellow print, this also happens to text typed in >> Techwriter 8.64. > > I made the same Draw-file, imported it into Impression and printed it. > All colours are printed, albeit a bit darker than on screen. Fine, but could you please try printing the file from Draw? There is no point in introducing yet another unknown into the equation by going through Impression, which has its own code to print Drawfiles and which has extensive colour correction features. Martin -- --------------------------------------------------------------------- Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx ---------------------------------------------------------------------