This was information for the crew setting up the 12x15 layout yesterday. We'll
be setting up the layouts at the SMV starting @ 1:00PM today.
Gilly
-----Original Message-----
From: carmast1 <dmarc-noreply@xxxxxxxxxxxxx>
To: rc3r <rc3r@xxxxxxxxxxxxx>
Sent: Sat, Nov 17, 2018 11:00 pm
Subject: [rc3r] Re: Tomorrow
Hi. Tom Won't see you on sunday, are we setting up on monday, if so aprox.
what time? Thanks Carl
Sent from my Samsung Galaxy Tab®4
-------- Original message --------
From: Thomas Gilsdorf <tlg225ccr94@xxxxxxxxxxx>
Date:11/16/2018 7:28 PM (GMT-05:00)
To: rc3r@xxxxxxxxxxxxx
Subject: [rc3r] Tomorrow
A reminder for the folks setting up tomorrow.
Only one cable needs to be connected between the power cabinet and the layout.
It is a 4 pin cable, connect to the socket labeled "T". There are two labeled
T, but the other is a 2 pin.The power connection is the inner trailer connector
at each module.Try to get the modules as close as possible to the height of the
adjacent module before clamping them together.ALL of the skirts for the 12x15
are in the rectangular plastic container. The other skirts go to the 6x11
layout.Legs for the 12x15 have two bevel cuts on one end. PLEASE do not force
them. If the leg doesn't slip in easily, rotate it 90 degrees until it does.Any
barrier will fit in any position. Slip both bolts in before you tighten the
wing nuts.There are two new Briteboys in the box with the cleaning supplies.The
Z4000 transformer does not need to come out of the trailer. All the power is
preconnected in the power cart.
Have fun. I'll be in the bushes looking for a slick-head.
Gilly
