Hi Tim, I’m using a raspberry pi 3 with Incredible PBX. I’m using Vitelity for
a SIP provider and all the phones are native SIP.
For pots lines I frequently use a Cisco IAD device with T1’s or RJ11
for PSTN termination. Most grand stream on the phones or soft phone clients.
Thanks
On May 16, 2017, at 1:59 PM, Tim Chase <raspberry-vi@xxxxxxxxxxxxxxxxx> wrote:
On May 16, 2017, Scott Granados wrote:
I have my pi running a full PBX and fax server and love it so far.
What are you using for your PBX to interface it with the telco
network? Are you using VoIP handsets or do you have traditional/POTS
phones plugged into hardware that does VoIP-to-POTS conversion? I'd
love to get some additional PBX features going on our home setup.
-tim
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
