Hi all,
after years playing with Raspbian/Raspberry OS, that I installed
headless without problems a lot of times, I decided to switch to Kali on
my Pi 4 (4GB model).
I found some indications online, so I downloaded Kali 64 for Pi 4, wrote
image on microSD, then put ssh and wpa_supplicant.conf on boot partition
(the only manageable under Windows), but something was wrong, because Pi
did not appeared on my network (it's connected to wired LAN too).
Do you have suggestions?
Thanks.
Alberto
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of the
Foundation.
Mike Ray, list creator, January 2013
