Are you sure you didn't plug into the microphone socket on the USB audio
dongle?
On 15/05/2017 13:09, Jacob Kruger wrote:
Yesterday I wrote the 2017-03-10-raspbian-jessie-lite-mate-usbaudio.img
image to a raspberry pi 3 unit, and, then booted it up, with the audio
jack of a mini speaker connedtted to the standard 3.5mm socket, and,
that part of it seemed to work fine.
I had also, before booting it up, connected an external USB adapter,
and, I switched the speaker's jack over to that one and then typed in
startx at the command line, but, nothing seemed to be happening, until I
switched back to the 3.5mm socket, and, there seemed to be a whole lot
of debug information rendering/scrolling, but, nothing seemed to happen
besides that, even when I left it for roundabout 5 minutes?
Should it have been some different command used to try fire up the
instance of ubuntu mate, or is it possible that the unit wasn't picking
up the external audio adapter?
Could try arecord -l to try list devices, but, this was just a quick
try, and, mainly wondering if this combination of hardware/software has
worked for others?
TIA
Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
