Hi,
Haven't posted much here at all, but this question caught my eye. Theres a
guide somewhere about how to blindly 3D print objects. Its kinda risky though
and a lot of work. I'm pretty sure its on applevis though if you search 3D
printer and filter to guides. Thats the only information I can lend on the
subject, and I haven't tried it myself either. Could always comment on that
article or pm the author.
Hope that helps at least somewhat.
Rory
On Aug 3, 2020, at 10:23 PM, David Mehler <dave.mehler@xxxxxxxxx> wrote:
Hi,
Are any 3d printers accessible?
Thanks.
Dave.
On 8/3/20, Ben Mustill-Rose <ben@xxxxxxxxx> wrote:===========================================================
I'd love to give this a go at some point. I believe I'm able to read
STL files to the point where I can figure out roughly what something
will look / feel like but have no confidence that I could write
something that would print successfully.
There's also the massive financial barrier to entry - spending at
least £250 on a new toy does sound appealing but I'm not sure what (if
anything) I'd make with it to justify the investment.
On 8/3/20, Jean-Claude Provost <jc.provost@xxxxxxxxxxxxxx> wrote:===========================================================
Hi,
It's high time that the subject got aligned with the real topic we're
discussing😊
I'd like it very much if you guys would let me know how it goes when you
try
this... My friend & I were having discussions about my ability to do that
&
we had issues that seemed hard to circumvent. Installing the material is
not a real big thing but the alignment & the monitoring of it all sounded
a
bit challenging... Again it seemed that it depended on the model of the
printer because, as we all know not all of these are created equal😊
Please do keep me posted...
Cheers,
Jean-Claude Provost
-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx
<raspberry-vi-bounce@xxxxxxxxxxxxx>
On Behalf Of Scott Granados
Sent: Monday, August 3, 2020 9:08 AM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: Will PI 4 fit into a 3b case
They are very interesting. My neighbor has one so I’ve tried his out
before
and you really can make small boxes or even whistles with it.
On Aug 3, 2020, at 6:07 AM, Pranav Lal <pranav.lal@xxxxxxxxx> wrote:
Hi Jean,
I have not operated a 3d-printer directly but will do so at the first
availability opportunity.
Pranav
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry
Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views
and attitudes expressed by the subscribers to this list do not reflect
those of the Foundation.
Mike Ray, list creator, January 2013
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views
and
attitudes expressed by the subscribers to this list do not reflect those
of
the Foundation.
Mike Ray, list creator, January 2013
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views
and
attitudes expressed by the subscribers to this list do not reflect those
of
the Foundation.
Mike Ray, list creator, January 2013
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
