Hi,
It's high time that the subject got aligned with the real topic we're
discussing😊
I'd like it very much if you guys would let me know how it goes when you try
this... My friend & I were having discussions about my ability to do that & we
had issues that seemed hard to circumvent. Installing the material is not a
real big thing but the alignment & the monitoring of it all sounded a bit
challenging... Again it seemed that it depended on the model of the printer
because, as we all know not all of these are created equal😊
Please do keep me posted...
Cheers,
Jean-Claude Provost
-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx> On
Behalf Of Scott Granados
Sent: Monday, August 3, 2020 9:08 AM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: Will PI 4 fit into a 3b case
They are very interesting. My neighbor has one so I’ve tried his out before
and you really can make small boxes or even whistles with it.
On Aug 3, 2020, at 6:07 AM, Pranav Lal <pranav.lal@xxxxxxxxx> wrote:
Hi Jean,
I have not operated a 3d-printer directly but will do so at the first
availability opportunity.
Pranav
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013
