What does return snmpwalk by ifDescr ? 09.05.2011 20:41, Christoph // 777-Systems N.V. пишет:
Hello World, I disabled all HP Mibs and activated all default Mibs. Than I didn't get the error messages anymore, but there are still no ports on the port tab. Now I see 'SNMP: completed 'generic' work SNMP: completed 'procurve-generic' work SNMP: completed 'procurve-chassis-1000T' work' on the port tab, but no ports. Any idea? Thanks for your help. So long. Christoph ----- Original Message -----From: "Christoph // 777-Systems N.V."<christoph@xxxxxxxxxxx> To: racktables-users@xxxxxxxxxxxxx Sent: Monday, May 9, 2011 5:00:46 PM Subject: [racktables-users] Re: Can't add HP switch for snmp-port-finding I have turned off the OID translation in /etc/snmp/snmp.conf. Now I get 'Unknown OID 'OID: iso.3.6.1.4.1.11.2.3.7.11.65''. So long, Christoph ----- Original Message -----From: "Alexey Andriyanov"<alan-74@xxxxxxx> To: racktables-users@xxxxxxxxxxxxx Cc: "Christoph // 777-Systems N.V."<christoph@xxxxxxxxxxx> Sent: Monday, May 9, 2011 4:27:15 PM Subject: Re: [racktables-users] Can't add HP switch for snmp-port-finding Hello Christoph. Racktables does not expect that OID will be returned translated. It is set numerically in the code, as you can see. So it compares 'HP-ICF-OID::hpSwitchJ9028A' with '11.2.3.7.11.65', and gets no luck. This certainly is a subject to fix, but for now you can get round of this by hiding HP's SNMP MIBs from RT installation somehow. 09.05.2011 18:13, Christoph // 777-Systems N.V. пишет:Hello World, I have tried to add a HP J9028A 1800-24G switch to snmp.php, but I still get an 'Unknown OID 'OID: HP-ICF-OID::hpSwitchJ9028A'' on the SNMP sync tab. I am using RackTables 0.19.4 and Ubuntu 11.04 snmp.php: 798a799,804'11.2.3.7.11.65' => array ( 'dict_key' => 850, 'text' => 'J9028A: 24 RJ-45/10-100-1000T(X)', 'processors' => array ('procurve-chassis-1000T'), ),Can someone give me a hint, what's wrong? Thanks for your help, I am new to RackTables and a little lost with this problem. So long, Christoph