[racktables-users] Re: Can't add HP switch for snmp-port-finding
- From: "Christoph // 777-Systems N.V." <christoph@xxxxxxxxxxx>
- To: racktables-users@xxxxxxxxxxxxx
- Date: Mon, 9 May 2011 11:41:59 -0500 (CDT)
Hello World,
I disabled all HP Mibs and activated all default Mibs. Than I didn't get the
error messages anymore, but there are still no ports on the port tab.
Now I see 'SNMP: completed 'generic' work
SNMP: completed 'procurve-generic' work
SNMP: completed 'procurve-chassis-1000T' work' on the port tab, but no ports.
Any idea? Thanks for your help.
So long.
Christoph
----- Original Message -----
> From: "Christoph // 777-Systems N.V." <christoph@xxxxxxxxxxx>
> To: racktables-users@xxxxxxxxxxxxx
> Sent: Monday, May 9, 2011 5:00:46 PM
> Subject: [racktables-users] Re: Can't add HP switch for snmp-port-finding
> I have turned off the OID translation in /etc/snmp/snmp.conf. Now I
> get 'Unknown OID 'OID: iso.3.6.1.4.1.11.2.3.7.11.65''.
>
> So long,
>
> Christoph
>
>
> ----- Original Message -----
> > From: "Alexey Andriyanov" <alan-74@xxxxxxx>
> > To: racktables-users@xxxxxxxxxxxxx
> > Cc: "Christoph // 777-Systems N.V." <christoph@xxxxxxxxxxx>
> > Sent: Monday, May 9, 2011 4:27:15 PM
> > Subject: Re: [racktables-users] Can't add HP switch for
> > snmp-port-finding
> > Hello Christoph.
> >
> > Racktables does not expect that OID will be returned translated. It
> > is
> > set numerically in the code, as you can see. So it compares
> > 'HP-ICF-OID::hpSwitchJ9028A' with '11.2.3.7.11.65', and gets no
> > luck.
> >
> > This certainly is a subject to fix, but for now you can get round of
> > this by hiding HP's SNMP MIBs from RT installation somehow.
> >
> > 09.05.2011 18:13, Christoph // 777-Systems N.V. пишет:
> > > Hello World,
> > >
> > > I have tried to add a HP J9028A 1800-24G switch to snmp.php, but I
> > > still get an 'Unknown OID 'OID: HP-ICF-OID::hpSwitchJ9028A'' on
> > > the
> > > SNMP sync tab.
> > >
> > > I am using RackTables 0.19.4 and Ubuntu 11.04
> > >
> > > snmp.php:
> > > 798a799,804
> > >> '11.2.3.7.11.65' => array
> > >> (
> > >> 'dict_key' => 850,
> > >> 'text' => 'J9028A: 24 RJ-45/10-100-1000T(X)',
> > >> 'processors' => array ('procurve-chassis-1000T'),
> > >> ),
> > > Can someone give me a hint, what's wrong?
> > > Thanks for your help, I am new to RackTables and a little lost
> > > with
> > > this problem.
> > >
> > > So long,
> > > Christoph
> > >
> > >
> > >
Other related posts:
