Hi Dirk, On Wed, May 4, 2011 at 9:09 AM, Dirk Bonné <dirk.bonne@xxxxxxx> wrote: > I think my next step should be to draw the front piece of the python in > openscad, together with the design of all the joints. And then find > somebody with a mendel-reprap and beg him/her to print one of the more > difficult joints. I know there is a "hackerspace" in Copenhagen > (labitat.dk) and they have a mendel-reprap. I live in copenhagen no > more, but could visit them once. I don't know of the fablabs here in the Netherlands have such a machine. If so I could help you to print it over here and send the result to you. I can't weld so if it works it much easier for me to finally build my own python :) Uipko ============================================================ This is the Python Mailinglist //www.freelists.org/list/python Listmaster: Jürgen Mages jmages@xxxxxx To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field. ============================================================