RH Designs a écrit : > David Starr wrote: > > > >I'm not totally sure, but you may have to operate a relay with the Analyzer > >and use the relay contacts to turn on the Chromegatrol. This would require > >the Chromegatrol to be in focus mode so the Analyzer could control the time. > > That is basically how we interface to the DeVere unit - the relay or > whatever is internal to the Transtab, and applying mains voltage to the > relevant pins on the big connector on the back turns the lamp on. The > Analyser, like just about every enlarger timer, simply acts as a controlled > mains power on/off switch and can indeed be used to power a relay if > required. LPL 5x4 enlargers also use such a system. > > > >I'm presently using a Saunders digital timer with a Chromega power supply > >and stabilizer, but I do have a Chromegatrol as well and was thinking about > >modifying it as I mentioned above. Please keep me posted on any other info > >you receive on this. > > As and when we sort this out I'll post the answers, and update the support > area of our web site. > > Regards > Richard Hello ! In order to help, someone, maybe ... The Durst CLS 450 head use either a transformer : TRA450 or a stabilized step down power supply EST450. Both contain, internally a relay (220 V ov 110V ) to turn the lamp on or off. So one can plug any timer to control the head (the relay draw a little current from it) you only need the correct plug. If one need, I own both schematics, and can scan and send them... Regards -- Ce message est constitué d'au moins 50 % d'électrons recyclés. Aucun électron n'a été blessé ou forcé d'aucune manière pendant l'écriture de ce message. S'il vous plaît aidez nous à conserver nos ressources, recyclez vos électrons ! ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.