I've just taken out of storage my Omega D5 XL and found the head at the top
with the 2 lift rods OVER the top of the column. I took off the 2 lift rods to
get the thing down from there but now the neg stage platform doesn't allow the
lift rods to go back in place.
It's been over 8 years since I've worked with this thing so I'm kinda lost and
given how simple the enlarger is, you'd think I could figure it out but I can't
see what I need to do to get things back in place. It's next to impossible to
do this without photos or a video but I'll at least get the ball rolling now in
case anyone has a manual for this thing. I have the one from
https://photoarchive.tundraware.com (once I turned on my VPN) but I'd found
that one out in the wilds already.
If anyone has or can direct me to a manual I'd be very grateful!
Eric
