[pure-silver] Re: Neopan SS

  • From: Janet Gable Cull <janetgcull@xxxxxxxxx>
  • To: pure-silver@xxxxxxxxxxxxx
  • Date: Thu, 12 Jul 2018 11:24:37 -0400

You know, I said “Perma wash” But it seems it’s really hyper clearing agent. I 
don’t still have the packet I mixed it from. On the jug I wrote, “Mix hypo 
here” I can’t find a receipt but I’m pretty sure hypo clearing agent is what I 
buy.


Janet Gable Cull
Sent from my iPhone

On Jul 12, 2018, at 11:17 AM, bobkiss caribsurf.com <bobkiss@xxxxxxxxxxxxx> 
wrote:

I believe perma wash works quite differently than KHCA.  Still worth trying 
KHCA.  Can't hurt.
Perma Wash MSDS (original Heico)  
http://www.art.illinois.edu/images/documents/MSDS/Darkroom-SDS/Heico-Permawash.pdf


From: "Janet Gable Cull" <janetgcull@xxxxxxxxx>
To: "pure-silver@xxxxxxxxxxxxx" <pure-silver@xxxxxxxxxxxxx>
Sent: Thursday, July 12, 2018 11:04:57 AM
Subject: [pure-silver] Re: Neopan SS

I did. I used Perma-wash. 


Janet Gable Cull
Sent from my iPhone

On Jul 12, 2018, at 11:02 AM, Claudio Bonavolta <claudio@xxxxxxxxxxxx> wrote:

You can also use a wash aid or plain sodium sulfite (20gr/l) which speeds up 
that dye removal (and washing).

Claudio Bonavolta
www.bonavolta.ch
 


12 juillet 2018 16:58 Tim Daneliuk <tundra@xxxxxxxxxxxxxx> a écrit:
On 07/12/2018 09:37 AM, Janet Gable Cull wrote: 
This morning I processed two rolls of Neopan SS. My son-in-law shot the 
film, and he doesn’t remember when. After I fixed it I looked to be sure 
there were images on it since it was probably very old, before all the 
washing. When I completely finished it and looked closer the film seemed 
bluish. I mixed up fresh fixer and fixed it again for a little over two 
minutes which should have been enough to clear it, if it needed that and 
using fresh fixer. I checked it again; still the same bluish color. I fixed 
it a third time and just went through the whole process, washing washing. 
It still looks the same. Does Neopan tend to have a bluish tint to it? 


Janet Gable Cull 
Sent from my iPhone 


Left over anti-halation dye can be removed by extended washing. Tmax is 
notable for this. I always wash film for at least 25 minutes in continuously 
exchanged water. 

-- 
---------------------------------------------------------------------------- 
Tim Daneliuk tundra@xxxxxxxxxxxxxx 
PGP Key: http://www.tundraware.com/PGP/ ;

=============================================================================================================
 
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you 
subscribed,) and unsubscribe from there. 

Other related posts: