[pure-silver] Re: Introduction + Polypan film
- From: Snoopy <snoopy@xxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Thu, 16 Aug 2007 14:47:37 +0200
Dear Horvath,
first of all welcome to the list :-)
At 14:37 16.08.2007, you wrote:
Yes, that's I have read also. Another point is that it has a tough
polyester base, even it's quite hard to cut, and you cannot tear it
off from the cartridge, obviously a movie film has to withstand tension.
As for the film: I do not think the strength of the film is a problem
with the cartridges ? After all you cannot really fit 90m of film
into one cartridge so you load the cartridge using a film loader and
then affix the end to the spindle using some kind of sticky tape ?
So then you can easily tear the film off the spindle?
Also look at it this way: sometimes you can "crease" the film when
you load it onto the reels in the darkroom and then you get little
half-moons from the bending. With a stronger film this is less
likely to happen.
Love,
Snoopy
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
