The Durst M601 has three condensers, if you stack one SIVOCON 80 on
another SIVOCON 80 it is configured for medium format, if you replace
the top SIVOCON 80 with the SIVOCON 50 it configures the enlarger for
35mm and smaller.
On 7/14/2018 12:38 PM, Richard Lahrson wrote:
I've got the Durst M601. It's for 2 1/4 max and the condensers
are stationary and not switchable. Usually like diffusion light
with the Super Chromega D 4x5, but use the Durst for needing
condenser to boost the contrast.
Rich
On Sat, Jul 14, 2018 at 10:15 AM, Janet Gable Cull <janetgcull@xxxxxxxxx <mailto:janetgcull@xxxxxxxxx>> wrote:
Yes! Thank you!!!
Janet Gable Cull
Sent from my iPhone
On Jul 14, 2018, at 9:55 AM, bobkiss caribsurf.com
<http://caribsurf.com> <bobkiss@xxxxxxxxxxxxx
<mailto:bobkiss@xxxxxxxxxxxxx>> wrote:
DEAR JANET,
If I understand you correctly you want enlarge head a bit
higher for the same amount of enlargement (size print). So you
want a slightly longer lens than your 80mm. I just searched for
"100 mm enlarging lenses" on ebay and there are many, many
available starting at around $65 US for componons and up to $1000
for a Leitz lens.
CHEERS!
BOB
------------------------------------------------------------------------
*From: *"Janet Gable Cull" <janetgcull@xxxxxxxxx
<mailto:janetgcull@xxxxxxxxx>>
*To: *"pure-silver@xxxxxxxxxxxxx
<mailto:pure-silver@xxxxxxxxxxxxx>" <pure-silver@xxxxxxxxxxxxx
<mailto:pure-silver@xxxxxxxxxxxxx>>
*Sent: *Saturday, July 14, 2018 9:10:01 AM
*Subject: *[pure-silver] Enlarger lenses
I use a Durst M605 enlarger.
I have an 8omm lens that mostly frustrates me (120 film). I need
something that will allow me to get the enlarger head up a little
bit without going to the ceiling. What do I want and is there a
direction I can go to look for a deal on it?
Thank you.
Janet Gable Cull
Sent from my iPhone