Dear Rich, I can ask my wholesaler here, have not seen them in the catalogue recently though. However beware: back when songs were sad and sweet and I knew them complete and I wore a younger mans clothes, I knew the head of the AGFA cartridge making facility. I swear, he looked just like Doc Brown from "Back to the Future" and it always took me a herculean effoert to not burst into laughter when I saw him. He had very similar mannerisms too. AGFA was an OEM to Fuji, Kodak and various German "drugstore" film confectioners who then reeled their stuff into AGFA made cartridges. (Often in fact the cheap films were pretty good AGFA emulsions). The DX Marker does not only notify the camera of the ASA setting but also the FILM LENGTH in exposures and Doc Brown and his merry men ran a huge quality control system to ensure that the LIDS of the cartridges (top and bottom) were exactly at right angles to the cartridge body. For if there is a deviation then the camera cannot read the DX markings properly. Which might lead to either wrong exposures but also -far worse- that the camera believes the film has 12 or 24 instead of 36 exposures - and the film then gets rewound early and customer gets very irate. Therefore I would be _very_ careful if you actually stick something onto the cartridge - if you just get it slightly crooked you will get problems. Probably a better idea to simply remove the paint from the cartridge at the required spots and not add extra thickness. The layout of the DX patterns is all over the web, you can surely find it. If you look closely, your cameras contacts are round little pins whereas the DX Fields are much larger squares, so there is some margin for error of the cartridge placement but good contact is vital. Try using one those eraser "pencils" which have the rubber inside and you can sharpen properly. Or you can use some chemicals to remove the paint. As for "adjusting the ASA". This is a fiunction of the camera, not the cartridge or the DSX markings. Some cameras will not allow annual setting or adjustment of the film speed. Good luck! Love, Snoopy On 05/30/2011 12:17 AM, richard lahrson wrote: > Hi! Are these still around? For sticking on to 35mm cassettes to use in > numerous p&s cameras. Is there an easy work around maybe like dymo tape or > some ink marking pen that would work? Thanks for all help! Rich > -- "Ceterum censeo, digitalem esse delendam" ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.