RE: Wondering.

From: "Jamie Cuthbertson" <jamie.cuthbertson@xxxxxxxxxxxx>
To: <ptr1-users@xxxxxxxxxxxxx>
Date: Mon, 15 Jun 2009 22:14:51 +0100

Phil,
 
I think the book answer is probably a very helpful "it depends"!
 
If you are not doing anything at the time and you have no reason to think
the unit is still doing some data transfer from say a backup or edit, then
probably nothing will happen.  However, if the unit is still working on an
operation of this kind, you may well lose data.
 
If in doubt, you are best to shut down and this ensures that all data
transfers are complete before the shut down is finished.
 
9 times out of 10 you'd be OK but it's the other 1 time that you need to
worry about!! (Smile)
 
Regards,
 
Jamie
 

  _____  

From: ptr1-users-bounce@xxxxxxxxxxxxx
[mailto:ptr1-users-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Parr
Sent: 13 June 2009 13:24
To: ptr1-users@xxxxxxxxxxxxx
Subject: Wondering. 


   I have a couple of those old p t r ones and I love them. So, what happens
if you change media, the card, while they are powered up?. 
 
   Phil Parr.

References:
- Wondering.
  - From: Phil Parr

RE: Wondering.

Other related posts: