OK. You send an APRS message to CALL by just writing CALL message <ENTER> This works also cross band so e.g. from 30m pskmail to 70 cm as long as the messages are being relayed to the appropriate band. For CALL to receive your message on HF the station needs to be linked to a server. You are automatically linked to the server you last connected, or by using the APRS Link button. see the quick start guide. You can check the local box by sending CALL@SERVERCALL Messagemessage message etc., max 140 characters. This is all case sensitive. Pse use only upper case for SERVER and CLIENT calls!! Rein > -----Ursprüngliche Nachricht----- > Von: "Greg Soucy" <kb1ncj@xxxxxxxxx> > Gesendet: 13.04.09 21:25:53 > An: pskmail@xxxxxxxxxxxxx > Betreff: [pskmail] Re: pskmail server question > Forgive me but I am new to this... I'm not sure how to send an aprs > message but would like to know more about how to and how it is > different. To answer the question, I sent the message as I would an > email after connecting through the connect command. - Greg > > -- http://pa0r.blogspirit.com