RE: Setting up Jaws to recognize light
- From: <kevinmeyers@xxxxxxxxxxxxxxxxxxxxxx>
- To: <programmingblind@xxxxxxxxxxxxx>
- Date: Thu, 9 Oct 2008 11:15:26 -0500
Thanks for the info. Actually after the softphone was installed we were
able to attach a wave file to it. So when the light comes on the sound
plays. I setup it up to make the sound every ten minutes. At first it
was setup to sound every 15 seconds. Don't need to hear I have a
message every 15 seconds.
Thanks,
Kevin Meyers
Systems Specialist
414.665.3110
-----Original Message-----
From: programmingblind-bounce@xxxxxxxxxxxxx
[mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Chris
Hofstader
Sent: Thursday, October 09, 2008 9:10 AM
To: programmingblind@xxxxxxxxxxxxx
Subject: RE: Setting up Jaws to recognize light
You can use the JAWS Frames Manager to put a little rectangle around the
message light and then assign the frame a couple of properties. First,
you
probably want JAWS to automatically announce that the color of the
message
light has changed - this will only work if the light is visible on the
screen. Also, you will want to add a keystroke to tell you the color of
the
light when you bring the program into focus. These are both doable
without
scripts in JAWS or Window-Eyes and shouldn't take much more than a few
minutes once you've read the documentation but may require a sighted
person
to help you draw the rectangle around the light if it isn't a distinct
control on the application's window.
cdh
Chris Hofstader
CUNY, BSO, ATG, Odds and Ends
email: cdh@xxxxxxxxxxxxx
Blog: http://www.blindconfidential.blogspot.com
Skype: BlindChristian
phone: 727-896-6393
-----Original Message-----
From: programmingblind-bounce@xxxxxxxxxxxxx
[mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of
kevinmeyers@xxxxxxxxxxxxxxxxxxxxxx
Sent: Thursday, October 09, 2008 8:45 AM
To: programmingblind@xxxxxxxxxxxxx
Subject: Setting up Jaws to recognize light
Hello,
I will have what called softphone installed on my Dell laptop at work
today. I was told that in order to tell if there are any messages in
the voice mailbox I would have to see a red light in the lower right
corner of the screen. If the light is on there are messages in my voice
mail. Is there a way to get Jaws to recognize this light and tell me
there are messages? Do I have to create a script? Will a script be
able to recognize this light? If a script will work does anything have
one that already does something like this?
Thanks,
Kevin Meyers
Systems Specialist
414.665.3110
This e-mail and any attachments may contain confidential information of
Northwestern Mutual. If you are not the intended recipient of this
message,
be aware that any disclosure, copying, distribution or use of this
e-mail
and any attachments is prohibited. If you have received this e-mail in
error, please notify Northwestern Mutual immediately by returning it to
the
sender and delete all copies from your system. Please be advised that
communications received via the Northwestern Mutual Secure Message
Center
are secure. Communications that are not received via the Northwestern
Mutual
Secure Message Center may not be secure and could be observed by a third
party. Thank you for your cooperation.
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
__________ Information from ESET NOD32 Antivirus, version of virus
signature
database 3505 (20081008) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus
signature
database 3505 (20081008) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus
signature
database 3505 (20081008) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
This e-mail and any attachments may contain confidential information of
Northwestern Mutual. If you are not the intended recipient of this message, be
aware that any disclosure, copying, distribution or use of this e-mail and any
attachments is prohibited. If you have received this e-mail in error, please
notify Northwestern Mutual immediately by returning it to the sender and delete
all copies from your system. Please be advised that communications received via
the Northwestern Mutual Secure Message Center are secure. Communications that
are not received via the Northwestern Mutual Secure Message Center may not be
secure and could be observed by a third party. Thank you for your cooperation.
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
Other related posts:
