[program-l] Re: Java Access Bridge installation
- From: "J. R. Westmoreland" <jr@xxxxxxx>
- To: <program-l@xxxxxxxxxxxxx>
- Date: Sun, 7 Aug 2011 19:02:50 -0600
Okay. Here is the doc I used to do things. I hope the list doesn't filter it
out. If it does let me know and I will send it to you off list.
It assumes you are using Jaws 12.x.
You will want to read it carefully and then follow the directions
completely.
At that point you can bring up a java applet, try swingset2, bring up java
monkey and you should see things there.
Also, if you can read the labels and controls things are working correctly.
Best,
J. R.
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx]
On Behalf Of David Reynolds
Sent: Sunday, August 07, 2011 3:10 PM
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] Re: Java Access Bridge installation
J,
I'm using the 32-bit version.
Which goes where, and how can you tell it is working?
Many thanks,
David.
_____
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx]
On Behalf Of J. R. Westmoreland
Sent: 07 August 2011 21:44
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] Re: Java Access Bridge installation
Are you using 64-bit? Are you using the 2.0.2 JAB? I'm using 64-bit and
2.0.2. Two of the dlls go in the jre\bin directory and one in the
windows\system32 directory.
J. R.
From: program-l-bounce@xxxxxxxxxxxxx [mailto:program-l-bounce@xxxxxxxxxxxxx]
On Behalf Of David Reynolds
Sent: Sunday, August 07, 2011 10:58 AM
To: program-l@xxxxxxxxxxxxx
Subject: [program-l] Java Access Bridge installation
I am having problems with this. I copied the three dll files into
windows\system32, as per the instructions on the oracle web site, but not a
lot happens. Javaferret and javamonkey don't appear to do much. Is there
anything else I should have done?
Many thanks,
David.
Other related posts:
