The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#2427) Re: phormconfig.php3 read-only <http://www.phorm.com/support/?rev=2427> AUTHOR: Patrick O'Hara DATE: March 25, 2003 at 11:07 p.m. EST Reply To: (#2426) phormconfig.php3 read-only Author: Learner Date: March 25, 2003 at 10:59 p.m. EST It should work with either, but you should just change the priviledge settings. In windows right click on file and select properties and uncheck the read only box. Something similar on other OS's but I can't remember off the top of my head. If you do change to using php instead of php3, make sure you delete the other ones, as the order of preference is php3, php, inc. Hope this helps, Patrick O'Hara WhitsundayIT QLD, Australia patrick@xxxxxxxxxxxxxxxx www.whitsundayit.com *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.