The following new message has been posted on Phorm Support Forum at <http://www.phorm.com/support/>. *************************************************************************** MESSAGE: (#2386) Re: Help on $PHORM_MYVARS <http://www.phorm.com/support/?rev=2386> AUTHOR: Holotech DATE: March 12, 2003 at 6:33 a.m. EST Reply To: (#2385) Help on $PHORM_MYVARS Author: Robyn Date: March 12, 2003 at 4:45 a.m. EST > when i reduce my table into 10 columns and stores few > fields , it works! but with 44 fields, it doesnt work. > it there a column limit in $PHORM_MYVARS? No, there's no limit; more likely there's some other problem that comes in with the 44 columns. Post your MYVARS setting here so I can look at it. *************************************************************************** This is an automatically-generated notice. If you'd like to be removed from the mailing list, please visit Phorm Support Forum at <http://www.phorm.com/support/>, or send your request to webbbs@xxxxxxxxxx If you wish to respond to this message, please post your response directly to the board. Thank you! ------------------------------------------------- You are receiving this message because you are subscribed to the Phorm mailing list. To send messages to the mailing list, simply send email to phorm@xxxxxxxxxxxxx from the address you have subscribed. You may unsubscribe from the list by sending email to phorm-request@xxxxxxxxxxxxx with 'unsubscribe' in the SUBJECT field.