Chris Bell (Lists) <chris.lists@xxxxxxxxxxxx> wrote: > Problem identified - it's a fault with the internal USB hub. The > first 3 of its ports function normally but the last 4 don't - they > don't like high current devices like my 500 mA memory stick. Wrong again! It WAS the memory stick after all. For some reason best known to itself, it doesn't work through 2 or more USB hubs. Confirmed on a PC which complained 'unidentified device' when plugged in via 2 hubs. (The 7-port internal USB hub is, in fact, two 4-port hubs chained together. The front sockets of my PandaRO were plugged into ports 5 and 6 of this hub, which this memory stick didn't like. All is fine now the front sockets are plugged into ports 1 and 2.) Chris Bell. --