[orcachat] Re: Electrical Planniing

  • From: "Paul Below" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "paulbelow" for DMARC)
  • To: "orcachat@xxxxxxxxxxxxx" <orcachat@xxxxxxxxxxxxx>, "ORCA@xxxxxxxxxxxxx" <ORCA@xxxxxxxxxxxxx>, "orcachat@xxxxxxxxxxxxx" <orcachat@xxxxxxxxxxxxx>
  • Date: Sun, 18 Aug 2019 22:52:54 +0000 (UTC)

Quick look is that a glider with a 72 inch wingspan?  If so a 20 size motor 
would seem like overkill to me.
A radian has a 78 inch wingspan and uses.a.480 size brushless  

Sent from Yahoo Mail on Android 
 
  On Sun, Aug 18, 2019 at 2:38 PM, ORCA@xxxxxxxxxxxxx<ORCA@xxxxxxxxxxxxx> 
wrote:   Tom, is the motor EFLM7300 that is discontinued (web site shows it 
backordered)?  And is the motor you are looking at this: Power 25 BL 
Outrunner Motor, 1250Kv (EFLM4025B).  This is a 25 size motor requiring a 
60A ESC where you listed only a 30A ESC.

E-flite doesn't give too many specs on the EFLM7300 motor.  However the 
planes that it fits are 60A ESC size.  Could you give us the size of the 
Sensoar and its weight?

E-flite has this motor, Power 25 BL Outrunner Motor, 1000Kv (EFLM4025C) that 
may work depending on the size of the Sensoar.

Also, ValueHobby.com has a good selection of motors at lower prices.

Rick Magnuson

-----Original Message----- 
From: Thomas Condon
Sent: Sunday, August 18, 2019 1:54 PM
To: ORCA List
Subject: [orcachat] Electrical Planniing

Folks,

I'm planning to re-power an old (pre-brushless motor or LiPo battery) 
Sensoar and would appreciate some help from someone who knows about the 
electronics.

Some time ago I planned (with the help of a dealer) a set of upgrades:
1) E-flite 1000Kv Brushless Outrunner motor - BL25
2) LiPo compatible 30A - E-flite Pro Switch Mode BEC Brushless ESC (V2) 
[EFLA1030B]
3) 3S 11.1v 1800 - 2500 mAh LiPo battery - E-flite 200mAh 3S 11.1V 30C LiPo, 
EC3 (EFLB22003s30)

Now that I've finally saved the money for this set of devices I find that 
E-flite has apparently discontinued the motor listed above, and has a 1250Kv 
BL25 for sale instead.  I don't know if that is still compatible with the 
other two devices.

Can someone help me with this question?

Thanks.


Tom 


  

Other related posts: