Tom, is the motor EFLM7300 that is discontinued (web site shows it
backordered)? And is the motor you are looking at this: Power 25 BL
Outrunner Motor, 1250Kv (EFLM4025B). This is a 25 size motor requiring a
60A ESC where you listed only a 30A ESC.
E-flite doesn't give too many specs on the EFLM7300 motor. However the
planes that it fits are 60A ESC size. Could you give us the size of the
Sensoar and its weight?
E-flite has this motor, Power 25 BL Outrunner Motor, 1000Kv (EFLM4025C) that
may work depending on the size of the Sensoar.
Also, ValueHobby.com has a good selection of motors at lower prices.
Rick Magnuson
-----Original Message-----
From: Thomas Condon
Sent: Sunday, August 18, 2019 1:54 PM
To: ORCA List
Subject: [orcachat] Electrical Planniing
Folks,
I'm planning to re-power an old (pre-brushless motor or LiPo battery)
Sensoar and would appreciate some help from someone who knows about the
electronics.
Some time ago I planned (with the help of a dealer) a set of upgrades:
1) E-flite 1000Kv Brushless Outrunner motor - BL25
2) LiPo compatible 30A - E-flite Pro Switch Mode BEC Brushless ESC (V2)
[EFLA1030B]
3) 3S 11.1v 1800 - 2500 mAh LiPo battery - E-flite 200mAh 3S 11.1V 30C LiPo,
EC3 (EFLB22003s30)
Now that I've finally saved the money for this set of devices I find that
E-flite has apparently discontinued the motor listed above, and has a 1250Kv
BL25 for sale instead. I don't know if that is still compatible with the
other two devices.
Can someone help me with this question?
Thanks.
Tom